Psvane Elektronisches Vakuumröhrenventil

1, PSVANE T-Collection series MK II use the Carbon Microcrystalline technology. Carbon Microcrystalline is a kind of very stable absorbent (material), and it has excellent heat transfer performance. Carbon Microcrystalline make up stabilization of the electrical performance inside of the Vacuum tube.  2, The PSVANE T-Collection series MK II tube socket is made with Teflon. It is very low electric inductivity, very low dielectric loss, and high breakdown voltage, high electric volume...

Filament heating  Uf .............................. 2.5 V  If .............................. 2.5 A  Static parameters  Ua .............................. 300 V  -Ug .............................. 45 V  Ia .............................. 60 mA  Gm .............................. 5.25 mA / V  ri .............................. 0.8 kΩ  μ .............................. 4.2  Pout .............................. 3.5 W  Limit rating ...

CV181-TII is double triode, used in voltage amplification circuit, Can be replaced directly by 6N8P and 6SN7GT. Heater UH: 6.3V IH: 0.6A Static Parameter Ua: 90 250 V Ug: 0 -8V Ia: 10 9 mA Gm: 3 2.6 mA/V Ri: 6.7 7.7 kΩ μ : 20 20 Ia: when Ug=-12.5V 1.3mA Ug: whenIa=-10uA - 7 -18V Maximum Rating class A1 Ua: 450V Ik: -20mA Pa: 5w Pa(No.1+No2): 7w Rg: 1MΩ Uhk: ±100V

PSVANE WE300B PLUS vacuum tubes Western Electric replica Valve 300B Best Matched Pair brand new The price is for a pair of PSVANE WE300B PLUS vacuum tubes Western Electric replica. PSVANE WE300B PLUS can place with the tube 300B perfectly.  If you buy 2pair(4 pcs), we will send the Factory full matched tubes to you.  Features： a) PSVANE WE300B PLUS, strictly follows the American Western Electric 1960s traditional craft meticulous build, whether sound or quality of any non-modern...

PSVANE VACUUM TUBE WE845 is direct-heated type thorium tungsten cathode triode, class A1 and AB1  Specification:  Heater  Uf---------------------------------------10 V  If----------------------------------------3.25 A  Maximum Rating  Ua----------------------------------1250 V  Pa-------------------------------75 W  Pout(max.sig)--------------------------150 W  Ia(max)------------------------------120 mA;  Direct Interelectrode...

The price is for 1 pair (2 pcs).  It is a direct thermal cathode power transistor for A1 type amplification. Adapted to the audio amplifier for output power requirements at 10W.  Filament heating  Uf (DC) .................. 5V  If (DC) ............... 1.2A  Static parameters  Ua ........................ 300V  -Ug ..................... 60V  Ia ........................ 60mA  Gm ........................ 5.5mA / V  ri ........................ 0.7...

Description：  Heater  Uf………………2.5V  If…………… 2.5A  Static Parameter  Ua……………………250V  -Ug………………… -45V  Ia……………………60mA  Gm……………………5.25 mA/V ...

Specification:  2.2 Electrical parameters ---- Rating rating unit  2.2.1 Capacitance between electrodes  2.2.1.1 Input Capacitance 15.5 PF  2.2.1.2 Output Capacitance 8.4 PF  2.2.1.3 Cross-circuit capacitance ≤ 1.5 PF  2.2.2 Typical operating parameters  2.2.2.1 Hot wire voltage 10 V  2.2.2.2 Hot wire current 0.36 A  2.2.2.3 Anode voltage 135 V  2.2.2.4 Curved gate voltage 135 V  2.2.2.5 Control gate voltage -3 V  2.2.2.6...

The beam power quadrupole KT88 has an anode ultimate power dissipation of 42W. In the audio amplifier, two tubes can achieve 100W power for the AB1 push-pull output, and KT88 can also be used in the electronic voltage regulator circuit. KT88 is similar to CV5220 and 6550 and can be used interchangeably. Hot wire heating UH............ 6.3 V IH............ 1.6 A Limit rating ------------- --KT94 KT100 KT94 KT100 Anode voltage.................. 800 800 800 800 V Second gate voltage......... 600...

UK-EL34 is a high-performance audio output pentode, its anode limited dissipation power is 25W. The output power is more than 10W when it is for Class A1 amplification as a single tube in audio amplifier.The output power more than 35W when it is for Class AB1 amplification.