Psvane T-417 300B-T Reference Tube Pre-amplifier and Headphone Amp
All items ONE-YEAR WARRANTY !!!
We can Declare the Value of the Order as Customer's Remark!!!
Very clean and well maintained PSVANE T-417 Reference Tube Pre-amplifier and Headphone Amp with upgraded power tubes, a pair of Shuguang Treasure 300B-Z,
Other tubes are a pair of upgraded RAYTHEON JAN-5842's, a Psvane 12AX7 and a GE5670.
Wonderful sounding, excellent extension in both the bass and higher frequencies, this is a pre-amp that is truly deserving of the title 'Reference'!!!
This unit consists of two parts: amplification and power. The enlarged part is amplified by 1/255670, and the two 5842 are respectively output. The output has 600 ohm balanced output and unbalanced output. The balanced output uses a cassette socket and the unbalanced output uses an RCA socket. The power supply section has a 300B for high voltage rectification, and a 300B and a 12AX7 form a high voltage regulator. The power and amplification sections are connected by aviation plugs and cables. This set of pre-stages is used in high-end audio systems with strict matching requirements. It is recommended that the user select the T845 post-amplifier that the company is equipped with the machine. We have optimized the matching of the machine to make the machine perform better.
Balanced and RCA Single ended Outputs and 2 RCA Inputs.
- Separate power supply from the preamp output stage - minimize internal noise to the output
- Pure signal chain for highest sound quality - no remote control circuit is used in this model
- Vacuunm tube rectification and vacuum tube voltage regulation
- (2) pairs of gold coated RCA inputs
- (1) pair of gold coated RCA output and (1) pair of XLR output
- (1) Headphone output - 600ohm impedance matching
- Connection power cable from power supply section to output stage is provided
- 1/2" German aluminum top plate on both power supply and output stage
- Custom hand wound special transformers for North American 120V power supply
- Stainless steel transformer cover for quick heat dissipation
- No visible screws from the top of the amplifier and power supply
- High end tubes used throughout: stock tubes include (2) Psvane 300B-T; (1) Psvane 12AX7-T; (1) Chinese military 6N3 (substitute model include 5670 and 396A) ; (2) Chinese military grade 6C16 (substitute model include 417A and 5842)
- Custom silver foil capacitors and silver signal wires used at key points
- Input impedance: 100k ohm
- Input sensitivity: 350mV
- Output voltage: 12V at 1% THD
- Output impedance: 600 ohm
- Frequency response: 5Hz - 35kHz, -1dB
- THD: <=0.1% (RMS 2.5V)
- S/N Ratio: 89 dB
- Power InNet weight: amplifier section - 10.5kg / 23 lbs; power supply section: 15kg / 33 lbs
- Size: amplifier section - 17" W x 7" H x 11" D; power supply section: 17" W x 8.25" H x 11" D