The CA preamplifier is a member of the Xindak 20th Anniversary Edition series, designed for use with the 20th Anniversary Edition Power PA. The pre-amplifier adopts a wide-band audio transformer + transistor hybrid amplifier circuit, and a dual-mono circuit design. The power supply and control circuit between the channels are independently powered. Features: 1. Dual mono amplifier circuit design 2. The input stage specially selects two special permalloy broadband audio...

Xindak's 20th anniversary product DAC is a high-performance audio decoder with a 32 Bit DAC chip, using the AK4397 Delta-Sigma D/A conversion IC from AKM. This IC has a powerful 32 Bit processing capability, which makes the D/A conversion capability more accurate and helps to reproduce higher-quality music signals. Power supply system: The machine adopts 4 Xindak special low-leakage magnetic power supply transformers and up to 24 sets of independent power supply units to reduce the interference...

Features: CS88 is a new integrated tube amplifier with KT88 developed by Xindak recently. Its output power can be 60W for each channel. It can drive loudspeaker easily because of its high output power. Specifications: S/N Ratio: ≥89dB THD: ≤0.25% (1kHz/2V) Output Impedance: 4Ω, 8Ω Number of Channels: 2 Frequency Response: 10Hz~30KHz Input: 1 group RCA Rated Output Power: 60W(CS88)/ 32W(CS34) Net Weight: 27.5Kg Weight: 30Kg Dimensions (W*H*D): 344mm*242mm*483mm

Features: 1.Adopt 12AX7(ECC83)*2, 6N8P(6SN7)*2 and KT88(6550)*4 Tubes to compose standard integrated amplifier; 2.Separate power supply to pre-amplifier stage and power amplifier stage; 3.Remote control available for all functions. Specifications: S/N Ratio: ≥89dB THD: ≤0.2% Number of Channels: 2 Tubes: 12AX7(ECC83)*2, 6N8P(6SN7)*2, KT88(6550)*4 Input Sensitivity: 390mV Frequency Response: 10Hz~70KHz (-1dB) Rated Output Power: 50W(8Ω) Remote Control: Supported Net Weight: 24Kg Weight: 27Kg...

Features: XA6950II is a hybrid integrated amplifier. It integrates the characteristics for both solid-state amplifier and vacuum tube amplifier. 1. Hybrid amplifiers (vacuum tube 6922 for preamp stage) 2. Build-in USB interface audio DAC 3. Two toroidal transformers for power supply 4. Remote control XA6950 (II) follows the previous version of the amplification circuit, the appearance of the highly praised by the user's A600 appearance, the use of a unique microcomputer control, protection...

Features: A08 is a dual/mono channel integrated Amplifier. It adopted the 300W linearity power and ICEpower250A amplifying module as the power amplification. ICEpower is a breakthrough of the technology which digital amplification is based on PAM (Pulse Amplitude Modulation) and overcome the shortages of D class amplifiers' sawtooth wave distortion to realize the digital conversion with higher precision and lower distortion. At the same time, to express the advantages of small size, lower heat,...

XA3200MKIIs is a tube preamplifier, an upgraded version of XA3200MKII. Each channel uses a 12AX7 and a 12AT7 respectively. The appropriate amount of negative feedback between stages is used to improve the frequency bandwidth and reduce various distortions. A CRC filter network is also used to effectively eliminate AC ripples in the power supply and improve the signal-to-noise of the entire machine. Compare; In order to make the sound more perfect, two Xindak special permalloy audio transformers...

Features: The Xindak XA6800R (II) adopts a new look and internals. It is a pure integrated amplifier designed with high standards in mind for our customers to enjoy their preferred music. Derived from the XA6800R, internals are made of carefully selected components with both objectives to improve sound performance and reliability. Operating as a pure class A amplifier, good heat dissipation is ensured through the design of copper heat conduction bridges on both sides of the amplifier. Not only...

Features: PA-M (III) is exclusively used in amplifying for mid audio and surround audio. It can constitute high-qualified 5.1 channel HT system with your stereo HI-FI system and Subwoofer. 1. 3 channel 2. final-stage: SanKen 2SC4468/2SA1695 high power valve to parallel output 3. Can switch to balanced signal or nonequilibrium signal 4. Using Dual toroidal transformer,high-capacity electrolytic capacitor for power supply 5. Nature 、loose 、powerful and thick sound. It adopts Dual toroidal...