Features: This unit adopts dual differential complementary symmetrical pushpull amplifying. FET (field effect transistor) is put to good use for the track amplifier while the following stage adopts symmetric current negative feedback circuit with wide frequency response range and low distortion. For each channel, there are two stages for impulse, with four pairs of well-selected high-quality HI-FI high-power geminate transistors as field effect tube output with wide dynamic range and strong...

Features: The Xindak XA6800R (II) adopts a new look and internals. It is a pure integrated amplifier designed with high standards in mind for our customers to enjoy their preferred music. Derived from the XA6800R, internals are made of carefully selected components with both objectives to improve sound performance and reliability. Operating as a pure class A amplifier, good heat dissipation is ensured through the design of copper heat conduction bridges on both sides of the amplifier. Not only...

XA3200MKIIs is a tube preamplifier, an upgraded version of XA3200MKII. Each channel uses a 12AX7 and a 12AT7 respectively. The appropriate amount of negative feedback between stages is used to improve the frequency bandwidth and reduce various distortions. A CRC filter network is also used to effectively eliminate AC ripples in the power supply and improve the signal-to-noise of the entire machine. Compare; In order to make the sound more perfect, two Xindak special permalloy audio transformers...

Features: NEW XA8250(II) preamplifier adopt the dual mono structure design, the right & left channel are completely seperate. 1. Class A amplify circuit. 2. Advanced digital volume control technology. 3. Each channel completely seperate, with excellent channel separation. 4. Thick silver aluminium front panle, modelling solemn and elegance. 5. 3pcs transformers to seperate supply power(left channel, right channel, control circuit). 6. With balanced & unbalanced input and output, select the...

Features: This cable is made of multi-strand copper wires twisted with 4N silver wires.  Its terminal is 24K gilded banana plug and loudspeaker fork respectively and the external is wrapped with high quality thermal shrinkage pipes. This cable is mainly used to replace the shorting sheet copper post between the binding posts for alt and woofer input of sound box,  which adds more flavor to the expressive force of music and is specially designed for audiophiles seeking for high...

Features: The basic material is using 6N copper wire, 24K gold-plated plug. With using of this wire, the sound tone is deep in low frequency, smooth and fine in medium high frequency and the equilibrium sense of whole b is enhanced. Length: 2.5 Meter Quantity: 1 Pair Other: The length can be made as your requirement.

Features: The SC-01 loudspeaker cable can make the music fuller, thicker, heavier, smoother and more comforting. The medium high frequency resolution capacity is good. The density and sense of hierarchies of the medium low frequency are substantially enhanced. The low frequency has good sense of condensation, first class penetration and satisfactory elasticity. The full frequency channels are very well balanced. The SC-01B is a Bi-wiring loudspeaker cable. Length: 2.5 Meter Quantity: 1 Pair...

Features: Its basis material, adopting US-made copper power line which is seldom seen domestically, is mostly suitable for A-class incorporated amplifier with heavy current.  It performances with rich tone color and cohesion at its low frequency section, improves and upgrades music minutiae and arrangement. Length: 1.5 Meter Quantity: 1 Piece  Other: The length can be made as your requirement Plug: US/EUR.

Features: PA-M (III) is exclusively used in amplifying for mid audio and surround audio. It can constitute high-qualified 5.1 channel HT system with your stereo HI-FI system and Subwoofer. 1. 3 channel 2. final-stage: SanKen 2SC4468/2SA1695 high power valve to parallel output 3. Can switch to balanced signal or nonequilibrium signal 4. Using Dual toroidal transformer,high-capacity electrolytic capacitor for power supply 5. Nature 、loose 、powerful and thick sound. It adopts Dual toroidal...

the price is for one pair Features: MS-3 adopts KT88(6550) tubes which are especially for audio amplify as amplify tubes. The preliminary amplifier stage adopts a 12AX7(ECC83) tube. In addition, a 12AT7 tube composes of a long-tail phase-reversal push-pull circuit. The following stage adopts two KT88/6550 tubes for power amplifying, which are especially for audio amplifiers. The output transformer is high quality EI type with wider frequency response. The power supply part adopts 280W high...