Shanling M1 Bluetooth APTX Mini DAP DSD Lossless MP3 FLAC APE Hifi Portable
You May Also Like
Shanling M1 Bluetooth APTX Mini DAP DSD Lossless Audio HIFI MP3 Portable Music Player ( Leather Case +Screen Protective Free)
Shanling M1 Portable Bluetooth Mini DAP DSD Lossless Music Player
1*Leather case(Color random distribution)
2* Protective Film
Size: 60mm * 50mm * 13mm.
Net weight: about 60G.
Screen: 2.35-inch TFT high-definition display (360 * 400)
DSD playback: support DSD64, DSD128.
Decoding: support to 192kHZ-24bit.
Bluetooth: 4.0 supports APT-X.
D / A conversion chip: AK4452.
Amp chip: MAX97220.
Gain selection: low gain, high gain.
Audio formats: APE, FLAC, ALAC, WMA, AAC, OGG, MP3, WAV, AIFF, DSF, DIFF
Sampling rate: 44.1kHz-192kHz.
Output: Headphone output (3.5 mm)
Output power: 35mW @ 32ohm.
Frequency response: 20Hz-20kHz (-0.5dB)
Distortion: 0.006% (A-weighting, output 500mV)
Signal to noise ratio:> 105dB (A-weighting)
Dynamic range:> 105dB.
Output impedance: 0.1 ohm.
Channel separation:> 70dB (32ohms, 1kHz)
Time jitter: 30ps (Typ)
Reference clock jitter: 200 seconds.
External storage: support to 256G TF card.
USB interface: Type-c (USB2.0)
Capacity: 950mAH lithium battery.
Life time: about 9-10 hours (charging time 3-4 hours)
Support system: Windows XP, Windows 7, 8, 10 (32 / 64bit), MACOSX10.1 or update
Equipped with Bluetooth 4.0, support APTX protocol to ensure Hifi sound quality.
Support Bluetooth bi-directional transmission.
Bluetooth can be used as a mobile phone and computer decoding amp, Bluetooth headset can also be connected to the Bluetooth speaker for wireless playback Clock function.
Use the Type-C USB connector.
Positive and negative can be inserted, technology and human integration.
USB bidirectional transmission.
Can be connected to a computer and mobile phone as an external decoding amp, USB decoder can also be connected as a digital dial (support WIN and MAC systems, and some with OTG-enabled Android mobile phone )
Up to 8 days deep standby.
No need to set the depth of standby, without shutting down after the use of equipment , just pause for one minute will automatically enter the standby, which means that other power consumption (such as decoding and amp chip power supply, etc.), only to retain the wake-up mechanism, a greater reduction in consumption , To achieve long standby. press the power button to about 1 second before listen to the music , convenient and quick.